Removal of the engine cover
Open the bonnet and cover the body with a soft cloth to prevent damage to the finish; remove the windshield washer nozzle and hose from the bonnet; mark the hinge position on the bonnet for later installation; remove the bonnet The fixing bolts with the hinges shall be removed, and shall prevent the hood from slipping off after the bolts are removed.
Engine cover installation and adjustment
The installation of the engine cover should be carried out in the reverse order of removal. Before tightening the fixing bolts of the engine cover and the hinge, adjust the engine cover front and rear, left and right, or use the hinge gasket and buffer rubber to adjust it up and down to make the gap evenly matched.
